ABN: 11 641 139 568

Plasterboard and Drywall Fixings: Your Ultimate Guide

Now that you have successfully plasterboarded your room, you wish to hang some wall-mounted objects. Whether you intend to install a shelf, a wall-mounted television, or hang a painting or mirror, you will require the appropriate plasterboard fixings.

This blog post will give you information about plasterboard and drywall fixings, so it would be best to continue reading to learn more. 

What Are Plasterboards and Drywall?

Plasterboards and drywall are two types of wall materials commonly used in building homes and office buildings. Plasterboards are made from a plaster mixture spread over paper or fiberboard. Drywall is made from gypsum, which is a mineral that is found in sedimentary rock.

What Are Drywall and Plasterboard Fixings?

Plasterboard fixings are first inserted into the wall and can hold a screw, allowing an object to be screwed into the wall through the fixing. This increases the area of the plasterboard under stress from suspended things, resulting in a significantly stronger hold than a screw alone.

How to Use Drywall Fixings?

Different plasterboard fasteners serve various purposes. In general, you must first drill a large clearance hole to allow the fastener’s body (not the head) to pass through the wall. This involves utilising the drill bit size indicated on the fixing package. Before drilling, fixing and screwing the object into the plasterboard, check the area for pipes or wires.

Drywall screws can grip the drywall thanks to their deep threads. They are put in through the drywall and into the wall studs for wall fastening. Both nails and screws should be installed with “dimples” that can be covered by plaster after installing the drywall.

The most popular method of attaching a plasterboard is inserting a plastic plug into the board. Wider plugs can support more weight than smaller ones. A screw of the right size can be installed in front of the plug once it has been installed.

Another easy plug to install is the anchor for hanging drywall. There are broad threads and a self-tapping screw. The mounting anchor is meant to be screwed into the drywall. Then another screw should be added to its end. 

How to Choose Plasterboard and Drywall Fixings?

Fasteners for plasterboard can be chosen relatively simply but consider weighing the item you intend to hang first. Doing so will ensure the safety of the things you’ll fix. Conventionally:

  • Plastic plugs typically weigh less than other types of fasteners. Some plastic plugs can support heavier loads and have wide openings behind the drywall.
  • Extraordinary amounts of weight can be supported by mounting anchors. However, check ahead of time and avoid assuming that a mounting anchor can hold a heavy object.
  • Some toggle bolts cause the drywall to expand significantly. Some can hold a lot of weight.


When working with plasterboard, remember to use the proper fasteners, and you should always use pins that can support more weight than the object being hung.

You won’t have to worry about a flat-screen television or painting falling to the floor because whatever you hang will stay in place. It would be best to have the pros do it for you to ensure the fixing quality.

If you need plastering services in Brisbane, We Plaster & recruit is the best for you! We know how to work on your fixings because we are experts in plasterboards and drywall. We believe in quality work to breathe new life into the interiors while also giving you value for your money. Contact us now!

Posted in New

Leave a Reply

Your email address will not be published.