ABN: 11 641 139 568

How to Plaster a Wall like a Pro: A Step-By-Step Guide

Plastering a wall is a task that can seem daunting, but with the right tools and techniques, it can be a satisfying DIY project. The process is similar whether you’re repairing damaged areas or completely plastering a new wall. In this article, we’ll go through the steps of plastering a wall, from preparation to finishing touches.

Tools and Materials Needed


You need to gather the following tools and materials before you begin:

  • Plaster
  • Trowel
  • Jointing knife
  • Bucket
  • Water
  • Sandpaper
  • Drop cloth or plastic sheeting
  • Mixing drill or paddle
  • PVA glue
  • Paintbrush
  • Spirit level
  • Plasterer’s hawk



Before you start plastering, it’s essential to prepare the wall. The first step in preparing your wall for plastering is removing wallpaper, loose paint, or other debris. This is important because plaster cannot adhere to surfaces covered in wallpaper or loose paint. Use a wallpaper scraper or paint scraper to remove any existing wallpaper or paint. If any stubborn areas won’t come off, use sandpaper to smooth them out.

Next, it’s time to fill any holes or cracks in the wall. Use a suitable filler, such as a joint compound or spackle, to fill any gaps or holes in the wall. Apply the filler using a putty knife, ensuring the surface is completely covered. 

Once the filler is dry, use sandpaper to smooth the wall’s surface. Sand until the surface is completely smooth and even. Be sure to dust off the wall thoroughly after sanding to remove any debris or dust that may have accumulated.

Finally, before you start plastering, it’s essential to protect any furniture or flooring in the room. Cover any furniture or flooring with drop cloths or plastic sheeting to protect them from plaster splatters. This will save you time and money on clean-up.

Mixing the Plaster


To begin, you will need a bucket, a mixing drill or paddle, and the plaster powder. But before you start, wear protective gear plasterers use, such as gloves and a mask, to avoid inhaling dust.

Start by adding the plaster powder to the bucket. Measuring the amount of powder accurately is vital to get the right consistency. Most manufacturers provide instructions on how much powder you need per gallon of water.

Next, add the water slowly to the powder while mixing with the drill or paddle. It’s essential to mix the plaster thoroughly to avoid any lumps.

Once you have mixed the plaster, let it sit for a few minutes to allow any lumps to dissolve. After a few minutes, mix it again to ensure that it’s smooth and creamy.

Applying the Plaster


Using a wide paintbrush, apply a coat of PVA glue to the wall. This will help the plaster adhere to the wall better. Let it dry completely before moving on to the next step.

Now, using a trowel and plasterer’s hawk, scoop up some plaster and spread it on the wall. Start at the bottom of the wall and work your way up, using the trowel to smooth the plaster out. Ensure the plaster is evenly spread and there are no bumps or ridges.

Once you’ve covered the entire wall, use a straight edge or spirit level to smooth out the plaster, removing any excess. This will create a flat and even surface.

Finishing Touches


After the plaster dries for about 20-30 minutes, use a jointing knife to smooth out rough spots or ridges. This will create a smooth surface for painting or wallpapering.

When the plaster has dried completely, use sandpaper to smooth out any imperfections or bumps. Wipe the wall down with a damp cloth to remove any dust.



Plastering a wall can seem daunting, but it can be a satisfying DIY project with the right tools and techniques. Remember to prepare the wall properly, mix the plaster thoroughly, and apply it evenly. With a bit of practice and patience, you can achieve a professional-looking finish.

To ensure the quality of your walls, it’s always best to work with an experienced plasterer in Gold Coast. At We Plaster & Recruit, you can rely on our team of skilled and knowledgeable plasterers to provide high-quality plastering services. We have years of experience in the industry and use only the best materials and equipment to ensure that our work meets and exceeds your expectations. Contact us today to learn more about our services and how we can help you achieve the perfect plastered walls for your home or business.

A Comprehensive Guide to the Uses and Benefits of Plaster

Construction plaster is a material that is widely used in the construction industry for various purposes. Different construction plasters are available in the market, and each type has unique properties that make it suitable for specific applications. In this article, we will explore the different types of plasters and their uses.

Types of Construction Plasters and Their Uses


Many different types of plaster are available, each with unique properties and uses. Here are some of the most common types of plaster:

1. Gypsum Plaster: The most commonly used plaster is made from gypsum powder, a soft mineral. Gypsum plaster is commonly used for interior walls and ceilings, as it is easy to work with and dries quickly.


  • Interior walls and ceilings
  • Creating decorative mouldings and cornices
  • Repairing cracks and holes in walls
  • Art and sculpture casting

2. Lime Plaster: This type of plaster is made from a mixture of sand, water, and lime, which is a naturally occurring mineral. Lime plaster is known for its breathability, making it suitable for external walls.


  • External walls, especially in damp or humid environments
  • Restoration and preservation of historic buildings
  • Eco-friendly construction projects

3. Cement Plaster: Cement plaster combines cement, sand, and water. This type of plaster is known for its durability and strength, making it suitable for use on external walls and other surfaces that require a strong and long-lasting finish.


  • External walls and surfaces
  • Concrete or masonry surfaces
  • Waterproofing basements and foundations

4. Venetian Plaster: Also known as polished plaster, Venetian plaster is a decorative finish made from a mixture of slaked lime, marble dust, and pigments. This type of plaster is known for its smooth, polished appearance and is often used to create a luxurious, high-end look on interior walls.


  • Decorative interior walls
  • High-end residential and commercial spaces
  • Creating a marble-like finish without using actual marble

5. Stucco: This plaster is made from a mixture of cement, sand, and lime and is typically used as an exterior finish on buildings. Stucco is known for its durability and ability to withstand harsh weather conditions.


  • Exterior walls and surfaces
  • Architectural detailing and decoration on building exteriors
  • Repairing and restoring damaged stucco surfaces

6. Acrylic Plaster: Acrylic plaster is a synthetic type made from a mixture of water, acrylic polymers, and fillers. This type of plaster is known for its flexibility, making it suitable for use on surfaces that may experience movement or expansion, such as wood or metal.


  • Interior and exterior walls and surfaces
  • Surfaces that experience movement or expansion, such as wood or metal
  • Decorative finishes and textures on walls and ceilings


Construction plaster is essential in the building industry for its versatility, durability, and aesthetic appeal. These plasters are used for various applications, such as creating smooth and durable interior and exterior surfaces, providing sound and thermal insulation, and enhancing the overall appearance of buildings. That is why construction plaster plays a crucial role in the construction industry by offering a wide range of applications and contributing to the structural integrity, functionality, and aesthetics of buildings.

Need a reliable plasterer in Gold Coast? Look no further than We Plaster & Recruit! Our experienced team is ready to tackle any project – big or small. Get in touch with us now!

Red Flags to Observe When Hiring a Plastering Company

Finding a trustworthy and dependable plasterer is crucial if you plan to plaster your home or office. Although numerous companies are available, identifying the right one can be challenging. Don’t worry, though. Here are some red flags you should observe before hiring a plastering company:

1. Lack of Experience

Plastering is not an easy task, requiring years of practice to master. A company that has only been in business for a few months or even a year may not have the experience necessary to do a good job. Always ask about a company’s experience level before hiring them.

One way to determine experience is to ask for references and photos of previous work. You can also analyse online reviews and ratings to understand their reputation.

2. No License or Insurance

In Australia, all plastering companies are required to have a license to operate. This license ensures that the company meets certain standards and is qualified to do the job. If a company cannot provide proof of their license and insurance, it’s a red flag, and you should consider looking for another plasterer.

3. Poor Communication

When dealing with a plastering company, it is important to have effective communication. Remember, common warning signs could be the company being hard to contact or taking a long time to respond to your inquiries. A reliable plastering company should be willing to answer your questions and respond promptly.

If you want to ensure good communication, it’s recommended to establish clear expectations and deadlines early on in the process. This will help avoid misunderstandings and ensure the project is completed within a reasonable time frame.

4. Poor Reviews

In today’s digital age, it’s easy to find company reviews online. If a plastering company has poor reviews or a low rating, it could be a red flag. While one or two negative reviews may not be cause for concern, a pattern of negative reviews could indicate that the company is not reputable.

Before deciding based solely on reviews, it’s important to research and be cautious. Reviews can be fake or biased, so it’s important to consider the company’s overall reputation. It’s also helpful to ask the company for references and talk to previous clients to better understand their experience working with the company.

5. No Written Contract

Before hiring a plastering company, you must have a written contract outlining the scope, timeline, and cost. It could be a red flag if a company is unwilling to provide a written contract. Additionally, if the contract is vague or doesn’t include important details, it could be a sign that the company is not reputable.

6. Pushy Sales Tactics

Some plasterers tend to use pushy sales tactics to pressure customers into making a decision quickly. This could include aggressive upselling or creating a false sense of urgency to get customers to sign a contract without fully understanding their agreement. A reputable plastering company should be transparent about its services and pricing and allow customers time to review and ask questions before deciding.

Final Thoughts

Hiring a plastering company requires careful consideration to avoid falling victim to scams or poor-quality work. By observing the red flags listed above, you can ensure that you choose a reputable and reliable plastering company that will deliver quality results. 

We Plaster & Recruit is a reliable plasterer in Brisbane that you can trust to provide excellent service and quality artistry. We pride ourselves on being transparent and honest with our customers and always providing detailed information about our services and pricing. Get in touch with us today!

Hiring the Pros: 5 Tips to Find the Right Plasterers

Finding a trustworthy and reliable plasterer in Australia can sometimes feel like searching for a needle in a haystack. However, with the right tips and guidance, you can locate a professional who will provide high-quality work and ensure your satisfaction.

Today, we will share a couple of essential tips for finding an honest, responsible, and reliable plasterer near you.

1. Word of Mouth and Personal Recommendations

The best way to find a reliable and honest plasterer is through word of mouth and personal recommendations from friends, family, and neighbours. These individuals have firsthand experience and can provide an unbiased opinion on the quality of work, professionalism, and reliability of a plasterer. Make sure to ask about their experience, the outcome of the project, and if they would hire the same person again.

2. Online Research and Reviews

In the digital age, a wealth of information is available at your fingertips. Utilise online resources like Google, Facebook, and trade-specific websites to research plasterers in your area. Look for reviews and testimonials from previous clients to gain insight into their work ethics, reliability, and quality of work. If a plasterer has a strong online presence with positive feedback, it is a good indicator of their professionalism and reputation. Keep in mind, however, that one negative review shouldn’t discredit a plasterer completely. You must use your judgment and assess the overall sentiment of the feedback.

3. Verify Experience and Qualifications

Before hiring a plasterer, it’s essential to verify that they have the necessary skills, qualifications, and experience to complete your project successfully. Look for a plasterer with a minimum of 3-5 years of experience in the industry and ensure they hold a current license to work in your state. In Australia, a qualified plasterer should have completed an apprenticeship or obtained a Certificate III in Solid Plastering or a similar qualification.

4. Request Quotes and Compare Prices

Obtaining multiple quotes from different plasterers will allow you to compare prices and gauge the market value of your project. Be cautious of quotes that seem too good to be true or significantly lower than others, as this may be a red flag for inferior work quality or hidden costs. On the other hand, the most expensive quote doesn’t always guarantee top-notch work. Aim to strike a balance between cost and quality by considering factors such as experience, reputation, and materials used.

5. Communication and Professionalism

Lastly, a reliable and responsible plasterer should be able to communicate effectively with you throughout the project. Pay attention to their professionalism during your initial interactions. Are they punctual, courteous, and willing to answer your questions? A plasterer who demonstrates a commitment to customer satisfaction and clear communication is more likely to deliver a high-quality finished product.


Finding an honest, reliable, and responsible plasterer may seem like a daunting task, but with these tips, you’ll be well on your way to locating a professional who can deliver exceptional results for your home or business. Remember to seek personal recommendations, conduct thorough online research, verify qualifications, request multiple quotes, and prioritise clear communication. By taking the time to do your due diligence, you can feel confident in your choice of plasterer and enjoy the peace of mind that comes with a job well done.

At We Plaster & Recruit, we are a licensed plastering business offering top-notch plastering services. Our focus is on delivering high-quality work that revitalises interiors while ensuring you get the most out of your investment. If you are looking for plasterers in Brisbane, work with us today!

A Quick Guide on Causes of Ceiling Cracks and When to Worry

We have all experienced that unsettling feeling when we spot a crack in the ceiling. Questions like “Is it new? Is it dangerous? Should I be worried?” start to pop up. 

While most ceiling cracks are superficial and can be easily fixed, it is crucial to understand their causes and recognise when it is time to call in ceiling repair specialists. This blog post will delve into the common causes of ceiling cracks, how to identify potentially hazardous ones, and when to worry.

Causes of Ceiling Cracks 

Normal Settling 

According to ceiling repairs specialists, one of the most common causes of ceiling cracks is the natural settling process of your home. As the foundation settles over time, the walls and ceilings may shift slightly, causing minor cracks in the plaster or drywall. It is expected, especially in new constructions or after significant renovation work.

Poor Workmanship 

If the materials used to construct your ceiling were low-quality or the installation needed to improve, cracks may appear over time. Poorly taped drywall seams, inadequate support, or substandard materials can all contribute to the development of ceiling cracks.

Moisture Damage 

Water damage is another common cause of ceiling cracks. Leaks from a damaged roof, plumbing issues, or excessive humidity can lead to moisture seeping into your ceiling, causing the materials to expand, contract, and eventually crack.

Temperature Fluctuations 

If your home is subject to significant temperature changes due to seasonal weather or a faulty HVAC system, the building materials’ expansion and contraction can cause cracks in the ceiling.

Structural Issues 

Occasionally, ceiling cracks can indicate a more serious structural problem with your home. If the foundation or supporting walls are compromised, the added pressure on the ceiling can form cracks.

When to Worry

While most ceiling cracks are harmless and can be easily fixed, there are some instances when you should be concerned. Here are a few signs that your ceiling cracks may indicate a more serious issue:

Wider or Expanding Cracks 

If a crack is wider than 1/8 inch or grows over time, it could be a sign of a structural issue. In this case, it is essential to have a professional inspect your home to determine the cause of the problem and recommend the appropriate repairs.

Parallel Cracks 

If you notice multiple cracks running parallel to each other, this could be a sign of a bowing ceiling caused by excessive weight or structural issues. It can be dangerous and should be addressed immediately by a ceiling repair professional.

Sagging or Bulging 

If the area around the crack appears to be sagging or bulging, it could indicate water damage or a structural problem. In either case, you should consult a professional to determine the cause and take the necessary steps to fix the issue.

Cracks Accompanied by Other Issues

If your ceiling cracks are accompanied by other problems, such as doors and windows that no longer close correctly, sloping floors, or cracks in the walls, it is time to call a professional. These signs could indicate a severe structural issue that needs to be addressed.


While it is normal for cracks to appear in your ceiling over time, it is essential to be vigilant and know when to worry. By understanding the common causes of ceiling cracks and recognising the signs of a more severe problem, you can take the necessary steps to protect your home and ensure its structural integrity. If you are ever in doubt, do not hesitate to consult with a professional, as it is always better to err on the side of caution when it comes to the safety of your home.

If you are looking for a specialist in ceiling repairs in Brisbane, you tap into the expertise of We Plaster & Recruit. We are a licensed and insured contractor that offers top-notch plastering services, so schedule an inspection now!

Tips on Selecting the Best Plaster for Your Project

Plastering is an essential process in the construction industry. There are different types of plaster available in the market, and you need to choose the right one for your project to achieve your desired results.

This article provides insights into the best type of plaster to use and what factors you need to consider when choosing one.

Types of Plaster

Before delving into which one to use, it is crucial to understand the different types available. They include:

1. Gypsum Plaster

Commonly used in construction, this plaster is made from gypsum, a soft sulfate mineral that occurs naturally. Gypsum plaster is easy to work with and dries quickly, making it a popular choice for interior walls and ceilings.

2. Lime Plaster

Lime plaster is another type of plaster commonly used in construction. It is made from limestone that has been burnt and slaked with water. It is suitable for exterior walls, as it is durable and has a natural resistance to weathering.

3. Cement Plaster

Made by mixing cement, sand, and water, cement plaster is a strong and durable type suitable for both interior and exterior walls. It is also resistant to moisture, making it ideal for bathrooms and kitchens.

4. Clay Plaster

This is a natural plaster made from a mixture of clay, sand, and straw and is suitable for interior and exterior walls. Clay plaster is also eco-friendly and has excellent thermal and acoustic insulation properties.

Factors to Consider When Choosing the Best Type of Plaster

Several factors will influence what type to use in your plastering service in Brisbane. These factors include:

1. Location

The location of the project will determine the type of plaster to use. For instance, lime plaster is ideal for buildings in coastal areas because it is resistant to salt damage. On the other hand, gypsum plaster is suitable for areas with low humidity.

2. Purpose

Is your building a residential home or a commercial one? This will also influence the type of plaster to use. For instance, if the building is a commercial or industrial building, cement plaster would be the best choice as it is strong and durable.

3. Climate

The climate of the area will also affect the plaster, so you should consider it when choosing what type to use. If the area experiences extreme temperatures, clay plaster would be the best choice as it has excellent thermal insulation properties.

4. Budget

The budget allocated for the project will also influence the material used for plastering. Some types of plaster are more expensive than others, and the budget will determine the choice of plaster.

Best Type of Plaster to Use

After considering the different factors, we believe gypsum plaster is the best type to use. It has several advantages over other types of plaster, including:

1. Easy to Work With

Gypsum plaster is easy to work with, and it can be applied using different methods, including spraying, troweling, or casting. It also dries quickly, allowing for faster completion of the project.

2. Smooth Finish

This plaster offers a smooth finish, which is ideal for interior walls and ceilings. The smooth finish also makes it easy to paint or wallpaper over the plaster.

3. Fire Resistant

Gypsum plaster is fire-resistant, making it ideal for buildings where fire safety is a concern. It can also be used to create fire-resistant partitions.

4. Moisture Resistant

Aside from fire, gypsum plaster is also moisture-resistant, making it ideal for bathrooms and kitchens. This plaster is also your best choice if you are in an area with high humidity.


Choosing the best type of plaster for your project requires careful consideration of different factors, including location, purpose, climate, and budget. After considering these factors, gypsum plaster emerges as the best type of plaster to use. Its easy workability, smooth finish, fire resistance, and moisture resistance make it the ideal choice for most construction projects.

At We Plaster & Recruit, we make sure that we’re using the type of plaster that suits your needs and budget. We have mastered and worked on all sorts of plastering contracts and follow strict protocols and guidelines to make our work stand out. If you need a plastering service in Brisbane, contact us today.

Damaged Drywall? Here’s How to Fix Water Damage Quickly

Drywall is a common material used in constructing homes and buildings. It’s also known as gypsum board, sheetrock, or plasterboard. Despite its durability, drywall is still susceptible to damage, especially if it gets wet. This article will discuss what happens if drywall gets damp and what you should do about it.

What Happens When Drywall Gets Wet?

Drywall is made of gypsum and paper, and both of these materials can be damaged by water. When water penetrates drywall, it weakens the gypsum, causing it to crumble and break apart. The paper covering the drywall will also get wet and bubble and warp. This can lead to mould growth, which can cause health problems for those exposed to it.

The drywall can also start to sag and lose its structural integrity if left wet for an extended period. The longer the water sits on the drywall, the more damage it will cause, making it more difficult and expensive to repair.

What Should You Do If Your Drywall Gets Wet?

For starters, find the source of the water and stop it. This may require shutting off the water supply or fixing a leaky pipe. Once the water source is under control, you can assess the damage to the drywall.

If the drywall is only slightly damp, you may be able to dry it out with a fan or dehumidifier. Wear a mask and a pair of gloves when handling wet drywall, as it can be a breeding ground for mould and bacteria.

You may need to remove and replace the drywall if it’s severely damaged. This is more complicated that involves getting rid of the damaged area and replacing it with new drywall.

If you’re not comfortable doing this yourself, hire a professional to do it on your behalf.

Steps to Repair Water-Damaged Drywall

If you decide to repair water-damaged drywall yourself, follow these steps:

  1. Cut Out the Damaged Area: Use a utility knife to cut out the damaged section of drywall. Make sure to cut along the centre of the studs so that you have a solid surface to attach the new drywall to.
  2. Install New Drywall: Cut a new piece of drywall to fit the hole you just created. Secure it to the studs using drywall screws.
  3. Tape and Mud the Seams: Apply drywall tape over the seams between the new and existing drywall. Then, apply joint compound (also known as mud) over the tape and smooth it out. Let it dry completely.
  4. Sand and Repeat: After the joint compound has dried, use sandpaper to make it a smooth surface. Do this procedure 2-3 times until the joints are perfectly even.
  5. Prime and Paint: Once the joint compound is dry, prime the repaired area and paint it to match the rest of the wall.

Final Thoughts

Although drywall is a durable material, it’s not invincible. Water damage can weaken drywall, leading to mould growth and structural damage. If your drywall gets wet, take action quickly to prevent further damage. Depending on the severity of the damage, you may need to hire a professional to repair it. However, if you’re comfortable doing it yourself, follow the steps said above to repair water-damaged drywall and restore your home to its former glory.

When it comes to drywall repairs, We Plaster & Recruit has the right people for the job. Our plasterers in Gold Coast, Queensland, have the expertise and experience to handle any drywall repair, big or small. Call us at 0481 416 120 to get a quote!

Plastering Tools Checklist: Common Tools All Plasterers Need

Plastering is a skilled task that requires the use of various tools and equipment to achieve a smooth and even finish. As a plasterer, having the right tools is essential to ensure that the job is done correctly and efficiently. Whether you’re a beginner or an experienced plasterer, it’s important to have a checklist of the necessary tools to ensure that you’re well-equipped for any project. In this article, we’ll go through a comprehensive list of the tools that plasterers need to get the job done right.

1. Finishing Trowel

A finishing trowel is a flat, rectangular tool with a handle that is used to apply and smooth the final layer of plaster. It’s important to choose a trowel that is the right size for the job at hand, as larger trowels can make it difficult to achieve a smooth finish. A good quality trowel will have a flexible blade that is made of stainless steel or carbon steel.

2. Hawk

A hawk is a flat, square tool that is used to hold the plaster while it’s being applied to the wall or ceiling. It’s important to choose a hawk that is lightweight and easy to handle, as it will be used for extended periods. A good quality hawk will be made of aluminium or magnesium and will have a comfortable grip.

3. Plastering Float

A plastering float is a rectangular tool with a handle that is used to apply and smooth the first layer of plaster. It’s important to choose a float that is the right size for the job at hand, as larger floats can make it difficult to achieve a smooth finish. A good quality float will have a flexible blade that is made of stainless steel or carbon steel.

4. Jointing Knife

A jointing knife is a small, flexible tool that is used to smooth and shape the edges of the plaster where it meets other surfaces, such as corners or edges. It’s important to choose a jointing knife that is the right size for the job at hand, as larger knives can make it difficult to achieve a precise finish. A good quality jointing knife will have a flexible blade that is made of stainless steel or carbon steel.

5. Bucket Trowel

A bucket trowel is a small, rectangular tool that is used to scoop plaster out of the bucket and onto the hawk. It’s important to choose a bucket trowel that is sturdy and easy to handle, as it will be used frequently throughout the plastering process. A good quality bucket trowel will be made of stainless steel or carbon steel and will have a comfortable grip.

6. Plaster Mixing Drill

A plaster mixing drill is a power tool that is used to mix plaster quickly and efficiently. It’s important to choose a plaster mixing drill that has a powerful motor and variable speed control, as this will allow you to mix the plaster to the right consistency for your project. A good quality plaster mixing drill will also have a comfortable grip and will be easy to use.

7. Plasterboard Saw

A plasterboard saw is a hand tool that is used to cut plasterboard to the right size and shape for your project. It’s important to choose a plasterboard saw that has a sharp blade and a comfortable grip, as this will make it easier to cut through the plasterboard. Good quality plasterboard saw will also be durable and long-lasting.

8. Sanding Block

A sanding block is a small, rectangular tool that is used to smooth and refine the surface of the plaster once it has dried. It’s important to choose a sanding block that is the right size for the job at hand, as larger blocks can make it difficult to achieve a precise finish. A good quality sanding block will have a comfortable grip and will be easy to use.

9. Plasterers Stilts

Plasterers’ stilts are a pair of adjustable stilts that are used to raise the plasterer off the ground, allowing them to work at a higher height. It’s important to choose plasterers stilts that are adjustable and comfortable to wear, as this will allow you to work for extended periods of time without discomfort. A good quality pair of plasterers stilts will also be durable and long-lasting.


Having the right tools is essential for any plasterer. By following this checklist of essential tools, you can ensure that you’re well-equipped for any project, whether you’re a beginner or an experienced plasterer. Remember to choose tools that are durable, comfortable to use, and appropriate for the job at hand, and you’ll be well on your way to achieving a smooth and even finish every time.

If you need plasterers in Brisbane, contact We Plaster & Recruit. We are proud to offer only the best plastering services with operations throughout Brisbane, Gold Coast and Queensland areas. Inquire and tell us how we can help you today!