ABN: 11 641 139 568

[email protected]

Month: February 2023

3 Different Types of Cracks Homeowners Need to Know

Posted on by We Plaster Team

Cracks in the home can be a major concern for homeowners. While some types of cracks are harmless and can be easily fixed, others can be signs of major structural damage and require professional help. Understanding the different types of cracks and their potential causes is essential in order to identify and repair any issues before they become bigger problems. In this article, we will discuss the various types of cracks homeowners must be aware of and how to identify them.


1. Superficial Cracks


Superficial cracks are a type of structural damage that can occur in a home. These cracks do not run deep but can indicate underlying structural issues. They can appear in stucco, concrete, or drywall and generally run in a straight line. Superficial cracks can also be caused by contraction and expansion due to temperature changes.


When homeowners notice these types of cracks, they should take the necessary steps to understand the cause and fix the problem. Generally, the cracks can be repaired with a patch or a sealant. If the cracks are larger or deeper, a structural engineer may need to be consulted to determine the cause and recommend a more permanent solution. Homeowners should also be aware that superficial cracks can be an indication of serious underlying structural damage, so it is important to address them as soon as possible.


2. Structural Cracks


Structural cracks are a type of crack that can form on a home’s foundation or walls and can indicate a more serious issue with the home’s foundation or walls. These types of cracks can form due to a variety of reasons, such as water buildup in the soil, soil shifting, poor construction, or even earthquakes. Structural cracks can appear in a variety of shapes, sizes, and directions, and it is important to identify them in order to address the underlying cause of the problem.


The most common forms of structural cracks are vertical, horizontal, and diagonal cracks. Vertical cracks are the most common and are usually caused by settlement, soil compaction, or shrinking of the concrete. Horizontal cracks are typically caused by ground movement or soil pressure and can indicate a serious structural problem. Diagonal cracks are often caused by foundation settlement or the shifting of the house itself. If any of these types of cracks are present, it is important to contact a structural engineer to inspect the home and determine the cause of the issue.


3. Cracks Requiring Major Reconstruction Work


Cracks requiring major reconstruction work are usually larger and more severe than those that can be easily repaired. These types of cracks can affect the structural integrity of a home and may require extensive repairs. They are often caused by shifting or settling foundations or by natural disasters such as earthquakes and floods. Major cracks may also be caused by improper installation, water damage or age-related wear and tear.


If you spot any cracks in your home that are wider than a quarter of an inch, or if you are concerned about the structural integrity of your home, it is important to contact a professional immediately. A structural engineer can assess the situation and advise you on the best course of action. Depending on the severity of the damage, repairs may involve reinforcing existing foundations, replacing damaged walls and floors, or even rebuilding entire sections of the home. It is important to note that major repairs can be costly, so it is always a good idea to hire a professional and get the job done right.


Final Thoughts


Cracks in the home can cause a wide range of problems, both structural and cosmetic. Knowing the different types of cracks and their causes can help homeowners identify the source of their problem and take the necessary steps to fix it. Homeowners should inspect their homes for signs of cracks, and if they find any, they should contact a professional to diagnose and repair the issue.


Patch up the cracks in your home with the help of We Plaster & Recruit. We are plasterers in Gold Coast that follow strict protocols and guidelines to make our work stand out. We believe in quality work to breathe new life into the interiors while also giving you value for your money. Request a quote now!

What are the Common Reasons Behind Cracks in Your Plaster

Posted on by We Plaster Team

Cracks in the plaster of your walls can be an eyesore and may leave you wondering what caused them. It is important to identify the cause of the cracks to address and fix the issue properly. 


In many cases, the cracks in your plaster can result from various factors, from environmental factors like humidity to structural imperfections in the home. In this article, we will discuss the common causes of plaster cracks and how to fix them.


Seasonal Change


Plaster is a porous material and can be affected by changes in temperature and humidity. When temperatures drop or humidity increases, the plaster will expand and contract, causing cracks in the walls. This is especially common during winter when the temperature and humidity are low.


Shrinkage


When the plaster is applied to a wall, it can take days or weeks to fully dry and cure. During this process, the plaster will shrink slightly, which can cause cracks. This shrinkage is natural and unavoidable but can be minimised by applying the plaster correctly and evenly.


Structural Imperfections


Cracks in the plaster can also result from structural imperfections in the home. These can be caused by several things, from uneven floors to poorly supported walls. These types of cracks can be difficult to fix without addressing the underlying problem.


Settling


When a home is built, the foundation will settle over time. This can cause the walls to shift slightly, which can cause cracks in the plaster. If the settling is severe, it may be necessary to have the foundation reinforced or repaired.


Water Damage


Water damage can cause plaster to crack and crumble. This is especially common in older homes that lack proper insulation or waterproofing. It is important to address any water damage promptly to prevent further damage to the walls.


Improper Application


If the plaster is not applied properly, it can cause cracks in the walls. This is especially common when the plaster is applied too thickly or unevenly. To prevent this, it is important to ensure the plaster is applied correctly and evenly.


How to Inspect Cracks


To inspect cracks in plaster, look for any signs of peeling, bubbling, or discolouration in the plaster. If the cracks are small and hairline, they can be repaired with a spackling compound or joint compound. 


If the cracks are larger and more severe, you may need to have the plaster replaced.


When inspecting cracks in plaster, it is important to note the size and shape of the crack. If there are multiple cracks in a single area, this could indicate that there may be an underlying structural issue with your walls or foundation.

 

Additionally, suppose you notice any water damage around the affected area. In that case, this should also be investigated further as it could point to a more serious problem, such as leaking pipes or roofing issues. 


If you find any large gaps between pieces of plasterwork, then these can usually be filled using joint compound before painting over them for a seamless finish. It’s always better to repair minor problems like cracking early rather than wait until they become larger and potentially damage other parts of your home’s structure.


To Sum Up


A variety of reasons, such as thermal expansion and contraction, poor construction, improper maintenance, vibration from daily activities, and moisture intrusion, can cause cracks in your plaster. It is important to identify the cause before attempting any repairs, as this will help ensure the issue is addressed properly and prevent further damage. To ensure that your plaster is in good condition, it is important to check it regularly and take preventive measures to reduce the risk of future damage.


We Plaster & Recruit has a team of trusted plasterers in Brisbane. We are a registered company that serves other areas, such as Gold Coast and Queensland. Ensure quality of plaster work today, contact us.

A Step-By-Step Guide for Plastering over Wallpaper

Posted on by We Plaster Team

Wallpaper is a common feature in many homes but can quickly become outdated or unsightly. Fortunately, it’s possible to plaster over wallpaper and give your space a fresh, new look. Plastering over wallpaper is a more involved process than simply applying a coat of paint, but with the right steps, it can be done with relative ease.


This step-by-step guide will help you understand the process of plastering over wallpaper, from prepping the wall to the finishing touches. But first, let’s discuss what plastering over wallpaper means.


What Is Plastering over Wallpaper?


Plastering over wallpaper, also called “skimming,” is a procedure by which the top layer of wallpaper is removed and replaced with plaster to improve the aesthetic appeal and create a uniform look of the wall. This process is used when the wallpaper on the walls needs to be unified or if there is minor damage, like cracks or scratches, that the wallpaper does not cover up entirely. It is one of the most common ways of achieving a blank canvas for any number of decorative and practical functions.


Why Should You Plaster over Wallpaper?


Plastering over wallpaper is a great way to save time and money. It eliminates the hassle of having to strip and remove the wallpaper, reducing the labour and cost associated with it. Additionally, the plaster will provide a much smoother surface for painting or applying new wallpaper, making it the perfect choice for anyone who wants to give their wall a new look.


How to Plaster over Wallpaper


Plastering over wallpaper can be tricky, so it is essential to follow these steps to ensure a successful result.


Step 1: Prepare the Surface


The first step when plastering over wallpaper is to prepare the surface. Begin by using a scraper to remove as much of the wallpaper as possible. Depending on the texture of the wallpaper, you may need to use a steamer to loosen it up and help you scrape it away. Use the scraper carefully so that you don’t damage the wall.


Step 2: Apply the Plaster


Once the surface is prepped, you can begin applying the plaster. Start by mixing the plaster according to the instructions on the packaging, then spread it on the surface using a trowel. 


Apply the plaster in small sections, starting at the top of the wall and working down. Then, use the trowel to even out the plaster and create a uniform layer. Be sure to check the wall for any lumps or dips and smooth them out as needed.


Step 3: Allow the Plaster to Dry


After the plaster has been applied, allow it to dry completely. This can take anywhere from a few hours to days, depending on the type of plaster you are using. Once dry, you can lightly sand the surface to ensure a smooth finish.


Step 4: Add Finishing Coat


Once the plaster is completely dry, add a finishing coat, such as paint or wallpaper. Make sure to use a mild detergent to wash the wall before applying any paint or adhesive. This will remove any residue on the wall and ensure that the finish looks its best.


Conclusion


Plastering over wallpaper is a great way to save time and money while giving your walls a fresh, new look. It is important to remember to take the time to properly prepare the surface and let the plaster dry completely before adding any finishing touches. With a bit of patience, you can achieve a professional look that will last for years to come.


For better plastering results, turn to us at We Plaster & Recruit. We have a team of experienced plasterers in Brisbane who can address all your needs. Contact us for more information.

The Different Factors That Affect Plaster Drying Time

Posted on by We Plaster Team

Plaster is one of the most versatile construction materials in use. It can be used for everything from patching holes to creating decorative architectural features. Its uses and benefits are numerous, but the one thing that can make it tricky to work with is its drying time.

Depending on what type of plaster you’re using and the plastering supplies you have on hand, the drying time can vary significantly. Here, we look at the factors influencing plaster drying time.


1. Humidity

 

One of the most critical factors affecting plaster drying time is the environment’s humidity level. Plaster needs moisture to cure and reach its full strength. 

If the air is too dry, the plaster will dry too quickly and not reach its optimal strength. In contrast, the plaster will take too long to dry if the air is too humid. Ideally, you want the environment’s relative humidity to be around 60% to achieve the best results.


2. Temperature

 

Just like humidity, the environment’s temperature can affect the drying time of plaster. The drying process will be slowed down when the temperature is too low. Likewise, the plaster will dry faster if the temperature is too high. Generally, you want to aim for temperatures between 18°C and 22°C to achieve the best possible drying times.


3. Air Circulation

 

The air circulation in the room can also impact the drying time of the plaster. Good air circulation encourages evaporation and helps to prevent damp spots from appearing on the surface. Plaster exposed to stagnant air will take much longer to dry and may end up cracking or shrinking due to inadequate drying.


4. Thickness of Application

 

The thickness of the plaster will also affect drying time. Thicker applications of plaster take longer to dry as the water has further to evaporate through. It is essential to use your plastering supplies to apply the plaster in thin layers to ensure that the drying process is even. Otherwise, it may crack or shrink due to inadequate drying.


5. Type of Plaster Used 

 

Not all types of plaster are made equally, and certain types of plaster have different drying times. For instance, lime plaster will usually dry faster than cement plaster. However, cement plaster is more durable and resistant to damage, so if you want a plaster that will last, you may have to wait a bit longer for it to dry.


How to Tell When Plaster Has Dried

 

The first way to tell when the plaster has dried is to look for changes in its colour. As it dries, the plaster will change from a wet, creamy colour to a solid grey or off-white. If the plaster looks the same colour as when it was first applied, it’s likely still wet.


Another way to tell when the plaster has dried is to touch it. When it is still wet, it will feel cool to the touch. As it dries, the plaster will start to feel warm.


Finally, you can use your plastering supplies, such as a moisture meter, to determine when the plaster has dried. Moisture meters measure the amount of moisture in the plaster and tell you when it has dried. These meters are especially useful for large plaster projects, such as walls or ceilings.

Conclusion

 

Drying times are an essential factor to consider when using plaster, as they can impact the quality of the finished product. There are several factors that can affect the drying time of plaster, including the humidity and temperature of the environment, the thickness of the application, the type of plaster used, and the air circulation. 


By understanding these factors and taking the necessary steps to control them, you can ensure that your plaster dries optimally.


For expert tips on plastering, work with our team at We Plaster & Recruit. We offer top-notch plastering services that meet your needs and expectations every time. Get in touch with us today to learn more.

5 Reasons to Hire a Professional Plasterer

Posted on by We Plaster Team

Plastering is applying a layer of plaster material to a wall, ceiling, or other surfaces to make it smooth, even, or decorative. It is usually done with a trowel and a bucket of plaster material. Plastering is a standard wall construction and finishing method in many parts of the world.


The Plastering Process


The plastering process begins with the preparation of the surface. This includes cleaning and preparing the surface for plastering, applying an undercoat of plaster, and then applying the top coat of plaster. Depending on the project, the top coat may be smooth or textured.


In addition to the actual plastering, a professional plasterer will also be responsible for ensuring that the surface is properly sealed and protected from moisture. This is usually done by applying a protective sealant or waterproofing membrane.


Plaster can be made from various materials, including gypsum, lime, cement, and sand. The plaster is mixed with water to form a paste which a plasterer then applies to the surface. After application, the plaster is left to dry and harden, creating a durable and attractive finish. Plasterers can also create decorative elements, such as mouldings, ornaments, and textures. Plastering is time-consuming and labour-intensive, but it can give a wall a professional and attractive finish.


Many people look at plasterers’ work and assume they can do it themselves. While any professional skill can be learned, it’s foolhardy to think that a first-time plasterer can achieve the same results as one with several years of plastering work.


If you’re building your own house and want the finished product to be as polished as possible, it’s best to hire professional help. Here are five reasons to hire a reputable plasterer for your home construction project.


1. Quality of Work


Professional plasterers have the experience and expertise to deliver superior-quality work. They have the experience and skills to create a long-lasting, durable finish that will look great. 


2. Time Savings


Professional plasterers can complete projects quickly and efficiently, saving you time and money. They are also familiar with the latest techniques and methods, ensuring a quick and flawless finish. 


3. Professional Tools


The hawk is the primary tool that plasterers use, which holds the plaster in place as it is applied to the wall. The hawk is usually lightweight and made of metal to allow easy maneuvers in tight spaces. It also has a flat surface, allowing the plaster to spread evenly and smoothly.


4. Safety


Depending on the scale and exact conditions of the job, plastering can be messy and dangerous. Professional plasterers have the experience and safety equipment to ensure that the job is done safely and correctly. 


5. Cost Savings


Professional plasterers can save you money by completing the job quickly and efficiently. They also have access to the best materials, ensuring you get the most for your money.


Conclusion 


Hiring a professional plasterer provides many benefits that make it the best option for any plastering project. From superior craftsmanship and quality materials to cost savings and a faster turnaround time, professional plasterers are the way to go for any plastering job. With their expertise and experience, you can trust that the job will be done right.


We Plaster & Recruit is the number one authority when it comes to plastering services in Brisbane. We also offer services in drywall, cladding, and more. Contact us today to learn more. 

Knowing the Main Comparisons between Plaster and Drywall

Posted on by We Plaster Team

Plaster and drywall are two materials commonly used to construct walls and ceilings. Both materials have their own advantages and disadvantages, and understanding the differences between them can help you make a more informed decision when constructing or remodelling your home.


The Definition of Plaster


Plaster has been used to coat walls and ceilings since the time of the ancient Egyptians. The outer walls of ancient structures and temples were protected with clay plaster and lime plaster. In the late nineteenth century, workers covered the interior walls of dwellings with cement plaster.


Putty board and wet plaster are the two most common plaster varieties used today. Plaster of Paris, or wet plaster, is made by mixing powdered clay, sand, cement, lime, or gypsum with water. This plaster powder can be reconstituted with water into a slurry or thick paste and then applied to walls with a trowel. Plaster and stucco look similar and share certain ingredients, but stucco is a decorative plaster used to produce a rustic aesthetic, whereas plaster gives a smooth surface when daubed on walls to conceal defects on a final layer.


The Definition of Drywall


Drywall, also known as sheetrock, cement board, wallboard, or gypsum board, can be purchased as either individual panels or as a joint compound. Drywall panels are made from gypsum (calcium sulphate dihydrate) and paper on both sides by manufacturers. This keeps the board in place when drywall screws or other fasteners are used to attach it to the wall.


Traditional drywall panels are used to insulate and protect the studs in a wall in a newly constructed home. Some manufacturers offer specialised drywall varieties with additives to enhance their functioning or conform to varying building requirements. For instance, in comparison to gypsum plaster blue board, the mould and water resistance of green board drywall is much higher. The latter is made from varying thicknesses of paper to resemble plaster. Basements and workplaces can benefit from the availability of soundproof drywall.


The Main Distinctions between the Materials


Before choosing a building material for your next do-it-yourself home renovation job, consider the distinctions between plaster and drywall.


1. Plaster Is More Expensive than Dry Wall to Install


Drywall and plaster have comparable material costs, but drywall installation takes a lot less time and skill to complete. To satisfy increased housing demand and reduce labour costs in the decades following World War II, builders largely phased out plasterwork in favour of drywall. Previously, covering a full wall required the laborious and time-consuming procedure of lath and plaster.


2. Drywall Is Not as Energy Efficient as Plaster


Greater insulation and temperature control can be achieved with plaster walls since they are thicker than regular drywall walls. The inside walls of a home can be made more soundproof or fireproof by increasing their thickness to this extent.


3. Compared to Drywall, High-Quality Plaster Walls Are Far Harder and Longer-Lasting


The walls of an old house can be examined with the help of a thumbtack, as the tack will go through the drywall much more easily than the plaster. Plaster can increase a building’s stability and safety because of its higher tensile strength and longer lifespan as a finished product. If the wall is in bad shape before you repaint it, you can veneer plaster over it or add more skim coats of plaster.


Conclusion


Plaster and drywall are two very different materials. Plaster is much more durable and fire-resistant than drywall. Drywall is much easier to install and repair than plaster. Plaster is the better choice for high-traffic areas or areas that require a lot of wear and tear, while drywall is the better choice for low-traffic areas.

Ultimately, the choice of plaster or drywall will depend on the individual circumstances of each project.


If you are looking for experienced plasterers on the Gold Coast, look no further than our experts here at We Plaster & Recruit. We are a registered plastering company providing the best plastering services with operations throughout Brisbane, Gold Coast and Queensland areas. Call us today, and let us deal with your cracked ceiling in no time!

What Characteristics Should a Good Plasterer Possess?

Posted on by We Plaster Team

Hiring a professional plasterer is a great way to improve the look and feel of your home. Plastering is a specialised skill that requires a trained eye and precision to get right. Whether you are looking to create a feature wall, patch up a small area, or completely remodel a room, hiring a professional plasterer can help you achieve the desired results.


When Should You Hire a Plasterer?


The most obvious reason to hire a plasterer is when you need to repair or install plaster. If the plaster in your home is showing signs of wear and tear or you want to create a custom design or texture, then a plasterer is the right person for the job. Plaster work requires a high level of skill, so it’s important to hire a professional who knows what they are doing.


Another reason to hire a plasterer is if you’re planning to remodel or renovate your home. Plaster is a great way to create a unique and beautiful look for any room. A professional can help you choose the right type of plaster, as well as the right design and textures to create the perfect look for your room.


Finally, if you’re looking to save money, then hiring a plasterer can be a great way to do so. Plaster tends to be more durable and long-lasting than other materials, so it can save you money in the long run. Plus, a professional plasterer can help you get the job done faster and more efficiently, so you won’t have to spend as much time and money on the project.


Qualities to Look for When Hiring a Plasterer


Plastering involves a lot of intricate work and can be a very time-consuming task. Therefore, it is essential to find a competent and reliable plasterer who can complete the job to a high standard. Here are some qualities to look for when hiring a plasterer.


1. Experience


It is important to look for a plasterer who has experience in the field. Experienced plasterers will have a better understanding of the job and will be able to complete it more quickly and efficiently. Ask for references and check the plasterer’s portfolio to make sure they have enough experience.


2. Attention to Detail


Plastering requires precision and attention to detail. A good plasterer will be able to pay close attention to the details of the project and will ensure that the work is done correctly.


3. Quality of Materials


Plastering involves working with a variety of materials, and it is important to hire a plasterer who uses quality materials. Ask for evidence of the materials being used and verify that they are up to standard.


4. Cost


It is important to find a plasterer who is able to work within your budget. Make sure to get a few quotes from different plasterers in order to compare and find the best value for money.


5. Safety


Safety is an important factor to consider when hiring a plasterer. Ensure that the plasterer is up-to-date with the latest health and safety regulations and aware of any potential hazards.


Conclusion


Hiring a plasterer can be a great way to improve the look of your home. Plaster can be used to create a variety of different looks, from smooth and modern to rustic and textured. Plaster can also be used to repair damaged walls or to create unique architectural features. If you are considering hiring a plasterer, be sure to get multiple quotes and check references.


Are you seeking a plastering service in Brisbane? You can hire us at We Plaster & Recruit. Our team of experts are fully licensed and insured, making sure you get the highest quality results. Get in touch with us at We Plaster & Recruit to learn more about what we can do for you.

What to Look for in Ceiling Repair Contractors

Posted on by We Plaster Team

Ceiling repair contractors can be a great asset when tackling a ceiling repair project. However, as with any contractor you are considering, it is essential to do your research and make sure you find the best contractor for the job. Here are some tips for finding the best ceiling repair contractor for your project.


Check Credentials


The first thing to look for when choosing a ceiling repair contractor is their credentials. Make sure to check that they have a valid contractor’s license, general liability insurance, and other applicable licensure and certifications in the area. Also, it is important to make sure the contractor has the experience and is knowledgeable in the type of repair project you are undertaking.


Get Referrals


Another great way to ensure you are choosing the right contractor is to get referrals from people who have used them in the past. This could be co-workers, friends, family, or people in the community who have recently had a similar repair project. Word of mouth can be a great way to determine if the contractor does quality work and is trustworthy.


Check Online Reviews


In addition to referrals, it is important to do some research on the contractor’s online reviews. Online reviews are a great way to determine if previous customers had a positive or negative experience with the contractor. If the contractor has a lot of negative reviews, it’s a good sign to look for another contractor for the job.


Ask about Their Cost Estimate


Once you’ve narrowed down your options, ask for cost estimates from each contractor. Make sure to get a detailed breakdown, so you know exactly what the job will include and what you’re paying for. Compare the estimates and make sure you’re getting the best rate for the job. Don’t be afraid to ask questions about what’s included in the estimate.


Compare Guarantees and Warranties


One of the most important things to look for when hiring a ceiling repair contractor is what kind of guarantee or warranty they offer for their services. Find out what kind of guarantees and warranties the contractor offers, and make sure you understand them. This will help you feel more secure in your decision and make sure you have protection in case something goes wrong with the repair.


Look for a Written Contract


Before signing any contracts, make sure to ask for a written agreement from the ceiling repair contractor. This should include the dates of the project and any details of the work they will be doing. This document should also clearly state the cost and payment terms to ensure both parties are aware of their financial obligations. Make sure to read the contract carefully and understand all of the details before signing.


Check Professionalism


It is also important to gauge the contractor’s level of professionalism. Do they have a website or online portfolio that showcases their work? Are they able to answer questions and explain the repair process in detail? Do they arrive on time and follow through with the job as promised? These are all critical indicators of the contractor’s professionalism and should be taken into consideration when selecting a contractor for the job.


Conclusion


Finding the right ceiling repair contractors for your project is an important decision. Make sure to do your research and take the time to find the best contractor for the job. Following these tips will help you find a reliable and experienced contractor for your ceiling repair project.


If you’re in need of plastering services or ceiling repairs in Gold Coast, trust We Plaster & Recruit for reliable and professional services. We are a registered plastering company specialising in all types of plastering services, including gyprock and cladding and drywall installation services. We have a team of experienced and qualified professionals who use the latest tools and techniques to provide a high-quality service. Contact us today to discuss your project needs.

Is Gyprock Ceiling the Best Choice for Your Project?

Posted on by We Plaster Team

Gyprock plasterboard is made by sandwiching two heavy speciality paper sheets between a layer of gypsum plaster. Building is now easier than ever, thanks to the variety of Gyprock versions available to fit various purposes. Construction for locations such as dry and wet areas is simple since it is available in the form of boards and a plaster compound.


In this article, Gyprock’s plasterboard is discussed in relation to remodelling or addition projects.


Overview of Gyprock


Gyprock and plasterboard are now interchangeable terms in the Australian construction industry. However, Gyprock is a company that manufactures plasterboard and other building supplies. 


Gyprock is to plaster and building supplies what Kleenex is to a certain brand of tissues. Gyprock has been a trusted household name since the 1940s and is the top producer of plaster products in Australia. 


It is also known as plasterboard, gypsum board, and drywall. It is mostly utilised for interior walls and ceilings.


Versatility and Efficiency of the Plasterboard


Plasterboard is your finest choice if you’re seeking an all-in-one material. Plasterboard is a very adaptable and versatile product that is readily accessible in a wide range of forms and finishes. 


Regardless of the intended purpose, you will undoubtedly find a Gyprock product that is suitable. Gyprock’s plasterboard solutions, which include properties like being fire-resistant, moisture- and mold-resistant, are very adaptable and can be tailored to your selected location. 


Plasterboard is frequently needed to repair medium- to large-sized holes or dents in walls and ceilings, in addition to being appropriate for restorations and additions.


Gyprock’s renown is also boosted by its adaptability. It can be improved with a variety of finishes, including paint, wainscoting, tiles, wallpaper, rendering, and so on. 


Whether you are working on a multi-story project or a straightforward restoration, using a plasterboard that comes in a sheet, ready-to-hang form will make both the cost and time of your project flow much more smoothly.


Safety Compliance


It is essential to adhere to all building laws, standards, and safety requirements while developing or renovating a space. Not all safety risks can, however, be totally eliminated. 


For instance, fire is one of the most dangerous risks that contemporary homes must constantly contend with, along with kitchen accidents, electrical problems, or bushfires. A product that decreases this hazard’s risk or negative effects is necessary and well worth the expenditure. 


A material that may be necessary for your project is fire-resistant plasterboard like Fyrchek, which is designed to meet Australian building regulations. Gyprock plasterboard can be changed to be soundproof and temperature-insulated, in addition to being sturdy, depending on your demands. 


Plasterboard may be an obvious choice and a great value thanks to these extra qualities of particular brands.


Made in Australia


Gypsum, a raw building ingredient that is a part of Gyprock, is widely accessible, allaying concerns about resource scarcity.


Gyprock plasterboard is easily accessible from the neighbourhood hardware stores because it is such a commonly used item and a trusted producer in Australia. This means that there is greater control over the product’s supply because it is proudly Australian-made. 


Conclusion


Plasterboard is a fantastic material option for the majority of renovations, additions, and repairs. You’ll need to invest in specialised plasterboard that is made to endure the circumstances you need it for because standard plasterboard won’t work in some situations.


We Plaster & Recruit delivers quality gyprock ceilings on the Gold Coast! We’re a registered plastering company that provides the best plastering services with operations throughout Brisbane, Gold Coast, and Queensland. Call us today for an appointment!

5 Questions You Must Ask When Hiring a Drywall Contractor

Posted on by We Plaster Team

Drywall is a building material used to make buildings’ interior walls and ceilings. It consists of a layer of gypsum plaster sandwiched between two layers of thick paper. Drywall is an inexpensive and easy-to-install option for many construction projects, which helps with maintenance and repairs to existing structures. However, drywall installation is a specialised service, so only qualified contractors can do the job.


Drywall contractors are specialists in installing, repairing, and maintaining drywall. They have the knowledge, skills, and tools to properly install drywall on both commercial and residential structures, so they can ensure that the drywall is appropriately and safely installed. However, many people often make the mistake of hiring unqualified contractors for their drywall needs, leading to faulty and structural damage.


To help you hire the best drywall contractor, you must first ask the following questions:


#1 – What Is Your Experience with Drywall Work?


When hiring a drywall contractor, it is vital to ask about their experience with drywall work. Ask them how long they have been working with drywall and what types of drywall projects they have completed in the past. This will give you an idea of their level of expertise and how much they know about the installation process. Ask for references and pictures of their previous work to ensure they are qualified to do the job.


Additionally, ask the drywall contractor what safety measures they take when installing drywall and what materials they use. You must ensure that the contractor uses suitable materials and tools for the job and knows about safety protocols. You should also ensure that the contractor will provide you with a detailed estimate of the project’s cost.


#2 – How Long Will the Job Take to Complete?


The amount of time it takes to complete a drywall job depends on the size and complexity of the project. Generally, a small drywall project, such as patching a wall or ceiling, can take anywhere from one to two days. However, larger projects, such as installing a new wall or ceiling, can take up to a week or more.


The drywall contractor should give you a better estimate of how long the job will take after they have seen the project and better understand what needs to be done. Factors such as the size of the room, the number of walls/ceilings, and the project’s complexity will all affect the job’s completion time. Asking about the timeframe will help you plan and budget accordingly and ensure that the job is completed on time. Additionally, ask the contractor what steps they will take to ensure that the job is completed safely and efficiently.


#3 – Does Your Company Have Licensure and Insurance?


When hiring a drywall contractor, you must ensure that the company is licensed and insured. A licensed contractor has undergone the necessary training and education and has legally met all local and state requirements to operate in the area. This ensures that they are qualified and knowledgeable in drywall installation and repairs.


Having insurance is also vital for both the contractor and the customer. It protects the contractor if an accident or injury occurs while on the job. Conversely, it also applies to the customer in case of a faulty installation or poor job performance.


#4 – Does Your Services Include a Warranty?


Warranty is just as essential as insurance because it gives customers a sense of security that their investment is protected. A good drywall contractor should offer a warranty on their services, usually lasting from one to five years. This warranty should include the cost of repairs or replacements for any materials or labour deemed defective.


This warranty should also cover any damage caused due to the contractor’s negligence or improper installation. It is important to note that the warranty should be in writing and clearly state the coverage’s terms and conditions.


#5 – What Are Your Payment Terms?


When hiring a drywall contractor, you must understand the payment terms to ensure you get the service you expect and avoid any potential disputes.

First, you should ask the contractor about their payment policy. Most drywall contractors will require a deposit before starting the project, and the remaining balance will be paid upon completion. The deposit should be reasonable and in line with the scope of the job. You should also ask for a payment schedule outlining when payments are due and ensure the contractor is aware of any deadlines.


Conclusion


Drywall installation is specialised, so hiring the best contractors is essential. While finding the best-qualified contractor will be challenging, it will be worth it because your investment will last for years. This way, your home will look beautiful and well-maintained.


If you are looking for plasterers in Brisbane, We Plaster & Recruit can help you! Our professional plasterers will ensure your home is fitted with the best materials for easier building, maintenance, and repair. Call us today at 0481 416 120 to request a quote!

Copyright © 2024 - We Plaster & Recruit. All Rights Reserved. Designed By

Code Crewz Technology Pty Ltd