Most people think that you can only hang curtains over framed windows, but you can actually hang them on internal windows as well. The problem is, the plasterboard may look solid, but it can’t hold a screw. If you don’t mount the curtain rod properly, the curtain will sag and you’ll have a hole to patch. However, if you have the right tools and know the right technique, you can hang heavy fabrics like velvet on internal windows without a wooden border.
When it comes to hanging heavy curtains on plasterboard, there are three main methods you can use: curtain rod anchors, longer screws, and center support brackets. The materials you need to install curtains will vary depending on the style you choose. However, for most styles of curtains, you can use one of these three methods to get the job done:
Use Curtain Rod Anchors
If you’re looking for a way to add a little extra support to your curtain rod, you may want to consider using curtain rod anchors. Curtain rod anchors are small devices that can be attached to the wall or ceiling to provide additional support for your curtain rod.
There are a few different types of curtain rod anchors available on the market, so it’s important to choose the right type for your needs. The most common type of curtain rod anchor is the screw-in type. These anchors are simply screwed into the wall or ceiling, and then the curtain rod is screwed into the anchor.
Use Longer Screws or Nails
To install curtain rods on plasterboard, you will need to use screws or nails that are longer than you would use for traditional window installation. This is because the extra length will help distribute the weight of the curtains more evenly across the plasterboard, making the joint stronger. Be sure to choose the right screws or nails, as you don’t want to keep drilling, which may cause more wall damage, to find the right fit.
Use Center Support Brackets
When it comes to hanging heavy curtains on plasterboard, center support brackets are one of the best ways to go. These brackets will provide extra support in the middle of the curtain rod, so that the weight of the curtains is evenly distributed. This will help to prevent the plasterboard from sagging in the middle, and will also make it easier to open and close the curtains.
You will need to purchase two center support brackets and two sets of screws. The first set of screws will be used to attach the brackets to the plasterboard. The second set of screws will be used to attach the curtain rod to the brackets. Be sure to use screws that are long enough to reach into the studs behind the plasterboard, so that the brackets are securely attached.
Once the brackets are in place, simply slide the curtain rod into the brackets and screw it in place. Then, hang your curtains on the rod and adjust the height of the rod so that the curtains fall evenly.
There are a few different ways that you can hang heavy curtains on dry walls or plasterboards. The most important thing is to make sure that the curtains are hung correctly so that they do not fall and cause any damage. Whether you choose to use curtain rod anchors, longer screws or nails, or center support brackets, you must ensure that you’re following the instructions correctly to get the best results and prevent damage to your drywall.
We Plaster & Recruit is a registered company that offers the services of a reliable plasterer in Brisbane. Get in touch with us to get a quote for your project!