ABN: 11 641 139 568

5 Best Practices for Cleaning Up after Plastering Projects

Plastering is a building trade that involves the application of plaster, a material made from a mixture of cement, lime, gypsum, sand, and water, to walls, ceilings, and other surfaces to create a smooth, even surface.

Plastering is used to protect the surface from moisture, provide a decorative finish, and improve the structural integrity of the surface. Although helpful, it is a messy process. But how do people clean up after themselves? Here are some ideas.

1. Dry Dust

Cleaning up after a plastering job requires different approaches depending on the mess left. It is best to take care of the hardened material for dried-up plaster. The first step in cleaning up after a plastering job is to use a dry dust cloth or vacuum to remove any excess plaster dust.

It will help to reduce the number of airborne particles and make the area easier to clean. Meanwhile, for people with sensitive allergies, dry dusting ensures that their allergies will not get triggered and make them sick during the entire process.

2. Floor Scraper

The second step in cleaning up after a plastering job is to use a floor scraper, a tool designed to scrape off any excess material that may have been left behind. Meanwhile, it can also loosen stuck material, possibly breaking off huge chunks of it from various surfaces.

Floor scrapers come in various sizes and shapes. Therefore, it’s essential to choose the right one for the job. The scraper should be able to reach into all the nooks and crannies of the area and remove any hardened material. As a result, it becomes easier to clean up.

3. Dampened Microfibre

Once the excess plaster is removed, it is time to begin cleaning. The use of a dampened microfibre cloth is recommended. The type of cloth is highly absorbent and can easily pick up large amounts of dirt and dust.

The cloth should be dampened with warm water and mild detergent, such as dish soap. Then, gently wipe down all of the surfaces that were plastered. It will help remove any remaining dirt, dust, and excess plaster that may have been left behind.

4. Wet Brush

Once the dampened microfibre cloth is used, the next step is to use a wet brush. The wet brush, usually a typical painting brush soaked in water, is designed to help remove any remaining plaster residue not picked up by the cloth.

People should dampen the brush with warm water and mild detergent. Then, gently scrub the surfaces that were plastered. It will help to remove any remaining dirt, dust, and plaster residue. As a result, the surface comes clean from any hardened plaster.

5. Scrubbing

The final plastering step is scrubbing the area with a soft-bristled brush. It helps to remove any remaining dirt or dust particles that were not removed by the wet brush. Avoid using too much pressure when scrubbing, as this can damage the newly plastered surface. Instead, use light strokes to wash the area until it is clean.


Plastering is essential in any home renovation project, and it is vital to do it correctly. Meanwhile, cleaning it requires simple steps, including mixing the plaster, applying it to the wall, and smoothing it out.

Once the plaster is dry, it is essential to clean the surface with warm water and mild detergent and then scrub lightly with a soft-bristled brush. These steps will help ensure that the newly plastered surface looks its best.

We Plaster & Recruit offers plastering services in Brisbane, ideal for ceiling repairs and drywall installations. We aim to assist homeowners in building, repairing, and maintaining their houses while providing affordable rates. Learn more about our services and book plasterers near you through our website today.

Posted in New

Leave a Reply

Your email address will not be published.